USER MANUAL

Morpho RD Service (Windows)

OT MORPHO RD Service for

Windows

Classification: OT-MORPHO Restricted

Version 1.1

Page 1 of 10

USER MANUAL

Table of Contents

Morpho RD Service (Windows)

1.

Introduction ........................................................................................................................

3

1.1. Purpose.........................................................................................................................

3

2.

S/W and H/W Requirement.................................................................................................

3

2.1.

Prerequisites for S/W .......................................................................................................

3

2.2.

Prerequisites for H/W.......................................................................................................

3

2.3.

Calling Application Details ................................................................................................

3

3.

Installation steps .................................................................................................................

3

4.

Un-Installation Steps ...........................................................................................................

6

FAQs ...........................................................................................................................................

7

Classification: OT-MORPHO Restricted

Version 1.1

Page 2 of 10

USER MANUAL

1.Introduction

1.1. Purpose

Morpho RD Service (Windows)

Purpose of the document is to assist end-user in installation of Morpho RD Service and using it with MorphoSmartTM Biometric Finger Print Device.

2.S/W and H/W Requirement

2.1.Prerequisites for S/W

MORPHO Biometric Finger Print Device is successfully integrated with customer business application.

Windows 7, 8, 8.1, 10 (32 bit and 64 bit)

2.2.Prerequisites for H/W

MSO1300 E, MSO1300 E2, MSO1300 E3 Fingerprint Sensor Device

2.3.Calling Application Details

AUA/KUA client application or any other customer business application to which MORPHO Biometric Finger Print Device is integrated.

3.Installation steps

1.Run 'MorphoRdServiceL0SoftSetup.exe' with administrator rights to install the RD Service and follow the instruction in setup wizard to complete the installation.

Classification: OT-MORPHO Restricted

Version 1.1

Page 3 of 10

USER MANUAL

Morpho RD Service (Windows)

2.On successful installation, please make sure following path is created on C Drive with 35 files.

Classification: OT-MORPHO Restricted

Version 1.1

Page 4 of 10

USER MANUAL

Morpho RD Service (Windows)

3.To check the RD Service is running , please run following command on Run Window in Administrative Mode

netstat –ab

In case of successful installation, following RD Service status would be shown

4.Plug-in the MORPHO Biometric Finger Print Device. If MORPHO USB driver is installed successfully, the device would be detected (light will be blinked for fraction of second).

5.After running the business application which is integrated with MORPHO RD Service, it will prompt to enter One-time-token may appear if the connected device is not white- listed at SCPL RD management server. Enter the provided token for RD Service to launch successfully.

6.For device whitelisting procedure, please refer to FAQs in next section of document.

Classification: OT-MORPHO Restricted

Version 1.1

Page 5 of 10

USER MANUAL

4.Un-Installation Steps

Morpho RD Service (Windows)

1)Run 'C:\MorphoRdServiceL0SoftSetup\unins000.exe' to uninstall the RD Service

2)Follow the instruction in setup wizard to complete the installation.

Classification: OT-MORPHO Restricted

Version 1.1

Page 6 of 10

USER MANUAL

FAQs

Ques. What is RD Service?

Morpho RD Service (Windows)

Ans. RD Service is a device provider’s registered device service compliant to Aadhaar Registered Devices Specification used to ensure secured biometric capture, and authentication of biometrics using UIDAI’s Aadhaar based services.

Ques. What is Port range on Local Machine where RD Services will listen for Windows?

Ans. 11100-11120

Ques. Which biometric device models are certified as a Registered Device?

Ans. The Morpho 1300 E, Morpho 1300 E2, Morpho 1300 E3 are certified as a Registered Device.

Ques. Are there any technical documents from UIDAI to refer?

Ans. All the updated technical documents can be checked from following link: https://authportal.uidai.gov.in/web/uidai/home-articles?urlTitle=technical- documents&pageType=resources

Ques. Is the Morpho devices certified for Level 0 or Level 1?

Ans. Level 0

Ques. From where will customer get MORPHO RD Service?

Ans. Go to www.radiumbox.com and go to Downloads and get Android and Windows RD Service Packages.

Ques. How can I use MORPHO RD Service?

Ans. Customers have to integrated MORPHO RD Service with their business application, get tested with the help of MORPHO RD Integration team for Staging and Pre-Production Environment and then use go for Production environment using MORPHO RD Production Services, downloadable from www.rdserviceonline.com.

Classification: OT-MORPHO Restricted

Version 1.1

Page 7 of 10

USER MANUAL

Ques. How can I get my device whitelisted?

Morpho RD Service (Windows)

Ans. Go to www.rdserviceonline.com and follow the process for device whitelisting. In case of bulk device (i.e. devices count is more than 100) whitelisting, please contact your respective account manager with SCL and perform certain formalities and get device whitelisted.

Ques. After RD Service installation, “Device Driver is not installed successfully” message is pop up in windows tray bar. What should I do?

Ans. Go to Device Manager (from Windows Control Panel ->Device Manager) and check MORPHO Device is under following tree

If it is not, please change the device type to “Universal Serial Bus Controller” using navigation Other Devices- >Unknown device-> Properties -> Update Driver- > “Browse My Computer for Driver Software” -> Add “C:\Morpho\MorphoSmart USB Driver” and click on browse and select ”usbBioDriver.inf”

in Driver search location and click on next for completion of manual driver installation and restart the machine for driver installation finalization.

Ques. How can I enable HTTPS communication between my application and RD Service?

Ans. Please use following Steps

Set value 'CommunicationMode:0' in

‘C:\MorphoRdServiceL0Soft\ConfigSettings.ini' file to enable Https communication in Morpho RD Service.

Keep the Bank/Merchant's server certificate file at 'C:\MorphoRdServiceL0Soft\' named as 'server.crt'. Certificate must be in pem format.

Keep the Bank/Merchant's server private key file at 'C:\MorphoRdServiceL0Soft\' named as 'server.key'. Private key must be in pem format.

Rename '127.0.0.1' as Bank/Merchant's URL to which certificate is issued, in the host file of the windows present at 'C:\Windows\System32\drivers\etc'. Update this URL in the calling Javascript functions given in the MorphoRDServiceTestPage.html.

Ques. What is Production Environment Setting in Config.ini?

Classification: OT-MORPHO Restricted

Version 1.1

Page 8 of 10

USER MANUAL

Morpho RD Service (Windows)

Ans. Please follow the following steps

1.Change the RDEnviroment variable in ConfigSetting.ini file (PATH : C:\MorphoRdServiceL0Soft\). Set RDEnviroment: 2

2.Change the URLs:

a.Registration : https://rdm.smartbioplus.com/rdm-device-app/registration

b.Keyrotation : https://rdm.smartbioplus.com/rdm-key-management- app/keyRotation

c. Telemetry

: https://rdm.smartbioplus.com/rdm-telemetry-app/telemetry

3.Change URL_IP : rdm.smartbioplus.com

4.Change URL_Port: 443

5.Restart the service

Ques. How can set Proxy server setting for RD Service?

Ans. Go to Proxy Configuration in config.ini file (C:\MorphoRdServiceL0Soft\Config.ini)

1.Set ProxyConfig variable value to 1. i.e. ProxyConfig:1

2.Set ProxyIP variable to Proxy Server IP address. In case, proxy script is to be used, please write Proxy Script URL.

3.Set ProxyPort variable to Proxy Server Port Address

Ques. What should I do even after setting the Proxy Server Setting, still RD Service call to management server is not reachable.

Ans. Please follow the following steps

1.Check the connectivity of Management server from Host machine (Machine on which RD Service is installed) through Proxy Server.

2.Check the ping of Proxy Server from RD Service on Host Machine using Network trace or any other supported trace mechanism.

3.If yes and request is still not reaching to Management Server, make sure the certificate

URL “*.COMODOCA.COM” is bypassed on Proxy server.

Ques. Error “Permission Denied” while running MORPHO RD Service Test HTML Page.

Ans. Please follow the following steps

1.root/url Certificate for RD services domain needs to be installed on desktop.

2.Add dns in trusted site for RD service.

3.Enable "Access data sources accross domains" in trusted sites customer level.

4.Reset customer settings to "Medium(default)"

Ques. What does following error means?

Classification: OT-MORPHO Restricted

Version 1.1

Page 9 of 10

USER MANUAL

Morpho RD Service (Windows)

Ans. It shows that the required certificate and key for HTTPS communication at required path “C:\MorphoRdServiceL0Soft\ConfigSettings.ini” is missing. Please put the certificate on mentioned path.

Classification: OT-MORPHO Restricted

Version 1.1

Page 10 of 10